Mondopad Firewall Requirements

Jeremiah Barkman -

For Mondopad application, the following firewall rules are required to run the application properly:

 Rule 1 (MP MP Invite/Share)

  • Protocol: TCP
  • Port: 2000, 3000
  • Direction: Inbound

 Rule 2 (MP Discovery)

  • Protocol: UDP
  • Port: 2001, 10089, 10086
  • Direction: Inbound

 Rule 3 (Present2 <-> PC Communications)

  • Protocol: UDP
  • Ports: 38436-38439
  • Direction: Both inbound and outbound

 Rule 4 (HTTP Access WWW – Web Services)

  • Protocol: TCP
  • Port: 80 (http)
  • Direction: Inbound

 Rule 5 (Video Calls)

  • Protocol: TCP & UDP
  • Port: 5060 (unsecure) or 5061 (secure with TLS)
  • Direction: Both Inbound and Outbound
  • Additional Port range Utilized during active call range from 25000-35000 (for infocus.net SIP service)
    • For other SIP service provider, please consult their administrator.
  • ALG routers convert IP and Port addresses which will block video Calls from succeeding. If using ALG routers then the router must configure the specific MP IP/Port for pass thru in order to function or disable the ALG functionality.

 Rule 6 (EMAIL, needs to be enabled depending on email service/configuration)

  • Protocol: TCP
  • Port (default):
    • SMTP Port: 25 (unsecure) or 587 (secure)
    • IMAP Port: 143 (unsecure) or 993 (secure)
    • POP Port: 110 (unsecure) or 995 (secure)
  • Direction: Outbound

 Rule 7 (VPN, needs to be enabled if planning on VPN into other Mondopad locations)

  • If using VPN both locations routers have to be setup to enable either PPTP, L2TP or IPSEC
  • Configuration varies depends on VPN solution vendor.

 Rule 8 (ControlView)

  • Protocol: TCP
  • Port: 6783, 6784, 6785
  • Direction: both inbound and outbound

Preferred: All outbound traffic should not limited by firewall rules.

If Mondopad is running Windows Firewall, Mondopad application will attempt to add/delete the above rule items 1 through 4 when application starts/stops. So, no user activity will be required.

If Mondopad is running 3rd party firewall, please add the above rules to the firewall ACL.

For Present2 application running on the client computer, the following firewall rules are required to run the application properly:

 Rule 1

  • Protocol: TCP
  • Port: 2000, 3000
  • Direction: Inbound

 Rule 2

  • Protocol: UDP
  • Port: 2001, 38439
  • Direction: Inbound

 Rule 3

  • Protocol: UDP
  • Port: 38437
  • Direction: Outbound
Have more questions? Submit a request

Comments

Powered by Zendesk